Professional Ford OBD2 diagnostic scanner with service reset: Common FAQs

When it comes to reliability and performance, nothing beats a Ford. Well-known for its strong and powerful engines, models like the Ford Mustang and F-150 have been icons of speed, towing strength, and endurance. The brand’s slogan, “Built Ford Tough,” really means strength and long-lasting design. However, just like any other vehicle, it also needs occasional troubleshooting to ensure you have a healthy and safe car. When you buy a professional Ford OBD2 diagnostic scanner with service reset, you save hours and money from simple guesswork.

As you may know, a Ford OBD2 diagnostic tool with service reset allows you to read and clear fault codes across engine, ABS, transmission and SRS systems, view live data to detect issues early, perform service resets after maintenance, as well as access Ford-specific protocols for accurate results. In this article, we will address some of the most frequently asked questions by new Ford owners. So, keep reading till the end.

FAQ 1: Can my scanner fix the Ford dashboard that shows an ABS warning?

Yes, a professional Ford OBD2 diagnostic scanner can help you diagnose and often fix ABS, also known as the Anti-lock Braking System, warnings. To perform the scan, simply connect your scanner to the OBD2 port, located under the steering wheel, turn on the ignition with the engine off, and select the ABS scan option. Once done, the scanner will display specific fault codes related to wheel speed sensors, hydraulic control units or brake switches. Once you repair or replace the faulty component, use the scanner’s “Clear Code” or “Reset ABS” feature to remove the warning.

FAQ 2: Why does my scanner show a communication error?

If your scanner fails to connect or displays a “communication error,” this is usually a small issue. This could be due to the following:

• Make sure the OBD2 plug is tight

• The key must be in the “ON” position for modules to communicate.

• Some older Ford models use non-OBD II protocols, so ensure your scanner supports them.

• If the OBD2 port’s power supply fuse is blown, you need to check your vehicle’s fuse box.

• And finally, update your scanner’s firmware or diagnostic software for better compatibility.

FAQ 3: How do I clear service lights?

When you get the professional Ford OBD2 diagnostic scanner, it allows you to choose the service reset function. To do so, you first need to connect the scanner to your Ford’s OBD2 port and turn the ignition to the ON position. Once done, navigate to “Service Reset” or “Oil Maintenance Reset,” select your model, and confirm the reset command. You are now good to go!

FAQ 4: Can an OBD2 tool prevent costly engine repairs?

Yes, in fact, preventive diagnostics is one of the main benefits of owning a reliable handheld Ford scan tool for engine and system diagnostics. With this tool, scanning your Ford every few weeks can help extend the life of your engine and other key systems. Not only that, but it also saves you tons of money by identifying misfires, poor fuel economy, or faulty oxygen sensors before they escalate. 

Additionally, it monitors real-time performance, including live data of the RPM, fuel trim, and coolant temperature, which helps spot irregularities and reduces the need for workshop visits. And finally, it allows you to avoid unnecessary part replacements by identifying the exact component causing trouble, significantly decreasing the guesswork.

FAQ 5: Can I use a Ford OBD2 scanner without technical knowledge?

New scanners are designed to be user-friendly even for beginners. In fact, when you buy a user-friendly Ford diagnostic software and OBD scanner online from a reliable store, you will be assisted with quick-start guides, video tutorials and customer support. Additionally, using these scanners is generally straightforward. 

All you need to do is plug-and-play setup with no complex wiring or coding. It features clear menus and touchscreen interfaces, as well as automatic fault code definitions, so you don't have to look them up online. Additionally, you get one-click service resets for easy maintenance.

Bottom Line

So, whether it is about clearing the service scan or determining what exactly is wrong with your Ford, when you invest in and buy a professional Ford OBD2 diagnostic scanner with service reset, it allows you to get accurate diagnosis data that will enable you to figure out what is wrong with your car. This not only amplifies its overall health and durability as an automobile, but also saves you time, energy, and money!